Doepfer Dark Time

Dark Time is an 2 x8 steps analog sequencer with CV/Gate, USB and Midi interface. It is planned in the first place as an add-on for the Dark Energy but may be used even in combination with other Midi, USB or CV/Gate equipment too.

Features overview

• two rows with 8 controls each

for each step:

• rotary control (same knob type as Dark Energy)
• red LED

three-position switch On/Off/Skip:

• On = trigger signal is active for this step
• Off = no trigger for this step
• Skip = step is skipped

three-position switch Stop/Continue/Jump

• Stop = sequence stops here
• Continue = sequence continues

Jump/Reset:

• If only one of the 16 toggle switches is in the Jump position a Reset is carried out (i.e. sequence jumps to stage 1)
• If two or more of the switches are in the Jump position the sequence jumps to the next step with the switch in the Jump position and then continues from this position (until another step with the switch in the Jump position is reached and then the same procedure is carried out again)

*NO POWER ADAPTER INCLUDED